Interfaces
8-22
DATA 1-8 Signal Driver/Receivers for the Lexmark E230, E232, E330, E332n,
and E234(n)
The following diagram illustrates each of the DATA 1-8 signal driver/receivers for the
Lexmark E230, E232, E330, E332n, and E234(n).
ACKNLG*, ERROR*, SLCT, PE Drivers for the Lexmark C510
The following diagram illustrates the ACKNLG*, ERROR*, SLCT, PE drivers for the
Lexmark C510.
FCT 2245
220 pF ±20%
+5V, 5%
GND
Connector
Pin
33 ohm ±5%
2.2K ohm ±10%
+5V
2.2K ohm ±10%
Connector
FCT 2827
39 ohm ±5%
150 pF ±20%
GND
FCT 2828
or
Pin
To Next Page
Loading...
