Lexmark T430 - Clearance Requirements; Environmental Conditions

Specifications
7-4
Clearance Requirements
Environmental Conditions
Note: When shipping or storing printers, always pack the printer supplies
(cartridges and photoconductors, for example) separately.
Dimension
Printer Model
T640dn T640dtn W840
Height 396 mm (15.6 in.) 535 mm (21.1 in.) 498 mm (19.6 in.)
Width 421 mm (16.6 in.) 425 mm (16.7 in.) 640 mm (25.2 in.)
Depth 638 mm (25.1 in.) 637 mm (25.1 in.) 525 mm (20.6 in.)
Weight 22.3 kg (49.1 lb) 25.23 kg (54.1 lb) 52 kg (114.4 lb)
Printer Side T430, T430d, T430dn
1
T640, T642, T644
2
Left side See footnote. 304.8 mm (12 in.)
Right side 76.2mm (3 in.) 304.8 mm (12 in.)
Front See Note 508 mm (20 in.)
Rear See Note 304.8 mm (12 in.)
Above See Note 137.16 cm (4 1/2 ft)
1
When installing the printer, the customer should leave enough room to access the paper tray(s), the
multipurpose feeder, the left side door and the rear exit door.
2
When installing the MFP, leave enough room to access the paper tray(s), the multipurpose feeder, the left side
door, and the rear exit door.
Table 7-4: Temperature Ranges
Printer Model Operating Value Shipping/Storage Value
T430, T430d, T430dn 16–32°C (60–90°F) -40 to 43°C (-40–43°C (-40
to 110°F)
-43°C (-40 to 110°F)
T640, T642, T644 16
–32°C (60–90°F) -40–43.3°C (-40 to 110°F)
W840 15.6
–32.2°C (60–90°F) -40–60°C (-40 to 140°F)