PCL
2-81
ESC
&t#P
0, 1 1 byte characters
21 1 or 2 byte characters
31 1 or 2 byte characters
38 1 or 2 byte characters
1008 1, 2, or 3 byte characters (UTF-8)
Text Parsing Method
Communicates to the PCL parser whether character codes are
interpreted as 1-byte or 2-byte character codes.
ESC
&k#S
0 10.00 cpi
2 16.66 cpi
4 12.00 cpi
Select Primary and Secondary Pitch
Selects the pitch for the primary and secondary font.
Table 2-26: User-Defined Symbol Set
Command / Parameters Function / Result
ESC
*c#R
# = Symbol Set ID (0 - 32767)
Default = 0
Symbol Set ID Code
Sets the symbol set identification for the symbol set downloaded.
ESC
(f#W[data]
# = number of data bytes
Define Symbol Set
Contains the data for the user-defined symbol sets.
ESC
*c#S
0 Delete all (temporary and permanent)
1 Delete all temporary
2 Delete current (ID)
4 Make current temporary
5 Make current permanent
Symbol Set Control
Manages user-defined symbol sets.
Table 2-25: Font Selection (Continued)
Command / Parameters Function / Result
To Next Page
Loading...
