Understanding printer messages
When Manual Feeder appears on the display, it refers to the multipurpose feeder.
List of status and error messages
Activating Menu Changes
Wait for the message to clear.
Busy
Wait for the message to clear.
Cancel not available
Wait for the message to clear.
Canceling
Wait for the message to clear.
Change <src> to <x>
<src> is a tray or feeder, and <x> is a paper type or size.
Try one or more of the following:
• Press the arrow buttons until Continue appears, and then press if the paper was changed.
• Press the arrow buttons until Use Current appears, and then press to print on the paper currently in the
printer.
• Cancel the current print job.
Check duplex connection
Try one or more of the following:
• Turn the printer off and then back on.
If the error occurs a second time:
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Remove the duplex unit.
4 Reattach the duplex unit.
Understanding printer messages 146
To Next Page
Loading...
