Lexmark X2650 - Color Printer 3-IN-1 User Manual

3 Gently hold the nozzles against the cloth for about three seconds, and then wipe in the direction shown.
4 Using another clean section of the cloth, gently hold the cloth against the contacts for about three seconds, and
then wipe in the direction shown.
5 With another clean section of the cloth, repeat step 3 and step 4, and then let the nozzles and contacts dry
completely.
6 Reinsert the print cartridge(s), and then print the document again.
7 If the print quality does not improve, clean the print nozzles, and then try printing the document again.
8 Repeat step 7 up to two more times.
9 If print quality is still not satisfactory, replace the print cartridge(s).
Preserving the print cartridges
• Keep new cartridges in their packaging until you are ready to install them.
• Do not remove a cartridge from the printer except to replace, clean, or store it in an airtight container. The
cartridges do not print correctly if left exposed for an extended period of time.
Cleaning the scanner glass
1 Dampen a clean, lint-free cloth with water.
2 Gently wipe the scanner glass clean.
Note: Make sure all ink or corrective fluid on a document is dry before placing the document on the scanner glass.
47

Lexmark X2650 - Color Printer 3-IN-1 Specifications

General

Maximum Print Resolution	4800 x 1200 dpi
Scan Resolution	600 x 1200 dpi
Scanner Type	Flatbed
Connectivity	USB 2.0
Print Technology	Inkjet
Functions	Print, Scan, Copy
Print Resolution Black	Up to 1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Paper Handling Input	100 sheets
Supported Media Sizes	A4, A5, B5, Letter, Legal, 4x6 in, 5x7 in, 8x10 in, Envelopes
Ink Cartridge Configuration	Black, Cyan, Magenta, Yellow
Operating System Compatibility	Windows, Mac