Lexmark X2650 - Color Printer 3-IN-1 User Manual

2 Click the plus sign (+) beside Universal Serial Bus Controller.
If USB Host Controller and USB Root Hub are listed, then the USB port is enabled.
For more information, see the computer documentation.
Solving printer power problems
The printer and the computer cannot exchange data.
These are possible solutions. Try one or more of the following:
MAKE SURE THE PRINTER POWER SUPPLY IS ATTACHED CORRECTLY
1 Press to turn the printer off.
2 Disconnect the power cord from the wall outlet.
3 Remove the power supply from the printer.
4 Reconnect the power supply to the printer.
5 Plug the power cord into the wall outlet.
6 Press to turn the printer on.
MAKE SURE THE PRINTER IS NOT IN SLEEP MODE
If the power light is blinking on and off slowly, then the printer is in sleep mode.
1 Unplug the power cord from the wall outlet.
2 Wait ten seconds, and then insert the power cord into the wall outlet.
3 Press to turn the printer on.
56

Lexmark X2650 - Color Printer 3-IN-1 Specifications

General

Maximum Print Resolution	4800 x 1200 dpi
Scan Resolution	600 x 1200 dpi
Scanner Type	Flatbed
Connectivity	USB 2.0
Print Technology	Inkjet
Functions	Print, Scan, Copy
Print Resolution Black	Up to 1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Paper Handling Input	100 sheets
Supported Media Sizes	A4, A5, B5, Letter, Legal, 4x6 in, 5x7 in, 8x10 in, Envelopes
Ink Cartridge Configuration	Black, Cyan, Magenta, Yellow
Operating System Compatibility	Windows, Mac