5 Press or repeatedly until Clean Cartridges appears.
6 Press .
A page prints, forcing ink through the print cartridge nozzles to clean them.
7 Print the document again to verify that the print quality has improved.
8 If print quality has not improved, try cleaning the nozzles up to two more times.
Wiping the print cartridge nozzles and contacts
1 Remove the print cartridges.
2 Dampen a clean, lint-free cloth with water.
3 Gently hold the cloth against the nozzles for about three seconds, and then wipe in the direction shown.
4 Using another clean section of the dampened cloth, gently hold the cloth against the contacts for about three
seconds, and then wipe in the direction shown.
5 With another clean section of the dampened cloth, repeat step 3 and step 4.
6 Let the nozzles and contacts dry completely.
7 Reinsert the print cartridges.
8 Print the document again.
9 If the print quality does not improve, clean the print nozzles. For more information, see “Cleaning the print
cartridge nozzles” on page 72.
73
To Next Page
Loading...
