5 Press or repeatedly until Photo Size appears.
6 Press .
7 Press or repeatedly until 4 x 6 in. or 10 x 15 cm appears.
8 Press .
9 Press or repeatedly until Paper Setup appears.
10 Press .
11 Press or repeatedly until Paper Size appears.
12 Press .
13 Press or repeatedly until 10 x 15 cm appears.
14 Press .
15 Press Start Color or Start Black.
Improving print quality
These are possible solutions. Try one or more of the following:
Check paper
• Use the appropriate paper for the document. If you are printing photos or other high quality images, for best
results use Lexmark photo papers.
• Use a paper that is a heavier weight or bright white.
Select a higher print quality
1 Depending on your print job, press Copy Mode, Scan Mode, or Photo Card.
2 Press .
3 Press or repeatedly until Quality appears.
4 Press .
5 Press or repeatedly until the quality you want appears.
6 Press .
Check print cartridges
If the document still does not have the print quality you want, follow these steps:
1 Align the print cartridges. For more information, see “Aligning print cartridges” on page 72.
If print quality has not improved, continue to step 2.
2 Clean the print cartridge nozzles. For more information, see “Cleaning the print cartridge nozzles” on page 72.
If print quality has not improved, continue to step 3.
82
To Next Page
Loading...
