Lexmark X422 Quick Reference Guide

Make a simple copy
1 Use the drawing on the scanner automatic document feeder (ADF
) as a
guide to feeding the paper and make sure the top of each page feeds
in first.
If you are using the scanner flatbed, place your document in the top l
eft
corner of the scanner.
2
Use the numeric keypad to enter the number of copies you want to mak
e. The
Copy screen will open automatically. (To make a copy with the def
ault
settings, press Start
).
3 Press
Start.
Make a single duplex copy
Note: To copy double-sided original documents, you must use the s
canner flatbed,
and scan each side. (Statement, A5, and Universal paper sizes
with a width
of less than 182 mm or a length less than 257 mm cannot be duplex
ed).
1 Place the original document face down on the scanner flatbed.
2
Press Copy
.
3 Choose
Options and then press the check mark button
(✓).
4
Choose Duplex and use the arrow keys to select
Long Edge . or Short Edge
,
depending on how you want your duplex to look.
5 Press
Start.
6 When the scan is finished for one side, turn the original document o
ver.
7 Choose
Scan Next Page and then press
✓.
Interrupting printing to make a copy
Unless disabled by your support person, printing may be interrupted to mak
e a
copy quickly. Press the
Stop button to stop the device, load your document into the
scanner, choose
Insert immediate copy job , and then press ✓
.
Tips
• If you are using the flatbed of the scan unit, watch the control panel
for
messages. After you have scanned the page, the
Scan Next Page or
Done
prompt appears. Place the next page and then press
Start to continue
scanning. Select
Done when all the pages have been scanned.
• Select a
Paper Saver
setting to copy two pages (or four pages) of your
original document onto one sheet of paper.
• When the
Scale setting reads Auto
, your copies are automatically scaled
from the size selected in
Copy From to the size selected in Copy To
.
Send a fax
1 Use the drawing on the scanner automatic document feeder (
ADF) as a
guide to feeding the paper and make sure the top of each page feeds
in first.
If you are using the scanner flatbed, place your document in the top l
eft
corner of the scanner.
2
Use the following method to fax:
a Press Fax
and use the numeric keypad to enter the fax number of the
person receiving the fax.
To change the default fax settings, use the navigation keys to highlight
Options and then press ✓
.
b
Press Start when you are ready to send the fax.
Canceling jobs
Fax jobs, jobs using the printer, and jobs being scanned may be
canceled if they
have not yet been completed. To cancel a job, press
Stop
and select either Cancel
scan, Cancel print jobs or Cancel faxes. Cancel scan will immediatel
y cancel the
current scan. Cancel print jobs and Cancel faxes will open li
sts of waiting jobs.
Select the job to cancel, then use the navigation arrows to highl
ight Delete. With
Delete highlighted, press the ✓
button to cancel the selected jobs in the list.
Using shortcuts
From the Home screen, entering # and a shortcut number will open the func
tion
associated with that shortcut. Shortcuts may also be entered in the To: fi
eld for fax,
the opening e-mail screen, or the manual entry screen for e-mail. Us
ing a shortcut
for a Profile, such as a Scan-to-PC profile, begins the job pr
ocess, so your originals
should be loaded in the scanner prior to entering the shortcut.
1 Place the original in either the ADF or on the flatbed.
2 Press the # key and enter the shortcut number
If you need more information
• Refer to the
Setup Guide or the
User’s Reference
located on the Publications
CD for information about using and maintaining your MFP.
Contact your administrator or Help desk if you have questions about netw
ork
printing.
Press to access paper menus
and other Administration menus
Press to set up copy jobs
Press to set up fax jobs
Press to set up e-mail and FTP jobs
Press to access held print jobs, stored
profiles and cancel print jobs
Press to navigate up and down in a menu.
Press to make a selection
Press to clear all job settings
and return to the Home screen
Press to stop device and access
Job Cancelation or Interrupt.
Press to start jobs
Press to backspace
Press to dial pause
LCD contrast control wheel
Press to enter copy quantities, fax
numbers, or shortcuts
Press to change function selections, and
to move left and right in a menu.
Quick Reference
P/N 16L0006 E.C. 6L0001
© Copyright 2004 Lexmark International, Inc. All rights re
served.

Lexmark X422 Specifications

General

Print technology	Laser
Resolution color	300 x 300 DPI
Maximum resolution	600 x 600 DPI
Time to first page (black, normal)	10 s
Print speed (black, normal quality, A4/US Letter)	21 ppm
I/O ports	Standard Ports: Ethernet 10/100BaseTX USB Compatible with USB 2.0 Specification Optional Network Ports: External 802.11b Wireless
Dimensions (WxDxH)	495 x 413 x 540 mm
Color all-in-one functions	Print
Print technology resolution	1200 DPI
Compatible operating systems	Apple Macintosh Operating Systems Supported: Apple Mac OS X Citrix MetaFrame: Citrix, MetaFrame and MetaFrame XP are registered trademarks or trademarks of Citrix Systems, Inc. in the U.S. and other countries. Microsoft Windows 2000 Server Terminal Services, with Citrix MetaFrame 1.8 or XP 1.0 Microsoft Windows NT 4.0 Terminal Server, with Citrix(R)MetaFrame(R) 1.8 or XP 1.0 Microsoft Windows 2003 Server Terminal Services, with Citrix MetaFrame XP 1.0 Linux Operating Systems Supported: Red Hat Linux 7.3, 8.0, 9.0 SuSE Linux 8.0, 8.1, 8.2 Microsoft Windows Operating Systems Supported: Microsoft Windows 2000 (Professional/Server/Advanced Server) Microsoft Windows NT (4.00/4.00 Server) Microsoft Windows Me Microsoft Windows XP Microsoft Windows Server 2003 (Standard, Enterprise) Microsoft Windows 98 2nd Edition Novell Operating Systems Supported: Novell Netware Enterprise Print Services (NEPS) with Lexmark NDPS IP Gateway Novell NetWare(R) 3.x, 4.x, 5.x, 6.x including full NDS and NDPS support Novell(R) Distributed Print ServicesTM (NDPS(TM)) 2.0 or later with Lexmark Printing Solution UNIX Operating Systems Supported: (SCO) UnixWare 7.0, 7.1, 7.1.1 Certified Solaris Ready by Sun Microsystems Compaq (Digital) UNIX 4.0D Compaq Tru64 UNIX 4.0F HP-UX 10.20, 11.00 IBM AIX 4.2.1, 4.3.3, 5.1 SCO OpenServer 5.0.4, 5.0.5, 5.0.6 SGI IRIX 6.5.x Sun Solaris 7, 8, 9 Sun Solaris x86 2.6, 7, 8 Other Operating Systems Supported: IBM iSeries or IBM AS/400 Systems with TCP/IP with OS/400 V3R1 or later using OS/400 Host Print Transform Virtually any platform supporting TCP/IP
Faxing	No
Modem speed	33.6 Kbit/s
Sound pressure level (printing)	52 dB
Total input capacity	350 sheets
Maximum input capacity	850 sheets
Maximum duty cycle	50000 pages per month
Network integrated ports	Ethernet 10/100BaseTX
Operating temperature (T-T)	16 - 32 °C
Market positioning	Business