Lexmark X746 - 24 X Paper Jam

Paper jam inside the printer top access cover
1 Open the printer top access cover.
Warning—Potential Damage: To avoid overexposing the
photoconductors, do not leave the front door open for more
than 10 minutes.
CAUTION—HOT SURFACE: The inside of the printer might
be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching it.
2 Open the front door.
3 Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note: Make sure all paper fragments are removed.
4 Close the front door, and then close the top access cover.
5 From the printer control panel, touch Continue, jam cleared.
24x paper jam
Paper jam in Tray 1
1 Open Tray 1.
2 Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note: Make sure all paper fragments are removed.
3 Close Tray 1.
4 From the printer control panel, touch Continue, jam cleared.
Paper jam in one of the optional trays
1 Open the specified tray.
2 Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note: Make sure all paper fragments are removed.
24