Notes:
• For some paper sizes like letter, legal, and A4, squeeze and
slide the length guide backward to accommodate their
length.
• The length guide has a locking device. To unlock the length
guide, slide to the left the button on top of the length guide.
To lock, slide the button to the right when a length has been
selected.
3
1
2
4 F le x t he she et s back and forth to loo sen t hem . Do no t f ol d o r crease
the paper. Straighten the edges on a level surface.
5 Load the paper stack toward the back of the tray with the
recommended printable side faceup.
Notes:
• When loading preprinted letterhead for one‑sided printing,
place the header faceup toward the front of the tray.
• When loading preprinted letterhead for two‑sided printing,
place the header facedown toward the rear of the tray.
One‑sided printing Two‑sided (Duplex) printing
LETTERHEAD
LETTERHEAD
Note: Make sure paper does not exceed the maximum paper fill
indicator located on the left side of the tray.
Warning—Potential Damage: Overloading the tray can cause
paper jams and possible printer damage.
6 Insert the tray.
7 From the printer control panel, verify the paper size and paper type
setting for the tray based on the paper you loaded.
Loading the optional 550‑sheet special
media tray
The optional 550‑sheet special media tray (Tray 2) supports narrow
paper sizes such as envelopes and A6.
7
To Next Page
Loading...
