EasyManua.ls Logo

Lexmark X746 - Additional Printer Setup; Installing Internal Options

Lexmark X746
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3 Close the tray.
4 From the printer control panel, touch Continue, jam cleared.
250 paper jam
1 Press the paper release lever, and then remove any jammed pages
from the multipurpose feeder.
Note: Make sure all paper fragments are removed.
1
2
2 Load new paper into the multipurpose feeder.
3 From the printer control panel, touch Continue, jam cleared.
29y.xx paper jams
1 Remove all original documents from the Automatic Document
Feeder (ADF).
2 Open the ADF cover, firmly grasp the jammed paper on each side,
and then gently pull it out.
Note: Make sure all paper fragments are removed.
3 Close the ADF cover.
4 Open the duplex cover, firmly grasp the jammed paper on each
side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
1
2
5 Open the scanner cover, firmly grasp the jammed paper on each
side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
25

Other manuals for Lexmark X746

Related product manuals