Sharpening an image
1 From the Finder desktop, double-click the Lexmark 7500 Series folder.
2 Double-click the Lexmark 7500 Series Center icon.
3 Click Preview/Edit to open the Scan dialog.
4 From the Scan dialog, click to open the Scan Settings drawer.
5 Click the Adjustments tab.
6 From the Blur/Sharpen area, move the slider to adjust the level of sharpness of the scanned image.
Related topics:
• “Customizing scan settings from the Scan dialog” on page 48
• “Enhancing photo print quality using the software” on page 105
Transferring photos from a memory device to the computer over a wireless
network
If the printer is connected to a computer through a wireless network connection, you can transfer photos from a
memory card or flash drive to the computer.
Note: The printer may require that you select a computer (and a PIN, if required by that computer).
1 Insert a memory card or flash drive containing the images you want transferred.
2 From the Finder desktop, double-click the Lexmark 7500 Series folder.
3 Double-click the Network Card Reader icon.
4 Select the printer you want to use.
Note: You need to add a printer to the Source list before you can select a printer to use. For more information,
see “Using the Network Card Reader” on page 140.
5 Click .
Wait for the Network Card Reader dialog to appear.
6 Select the images you want to save.
7 Click Save.
Working with photos
106
To Next Page
Loading...
