4 Press .
5 Press or repeatedly until the Dialing and Sending submenu is highlighted.
6 Press .
7 Press or repeatedly until you reach the Dial Method menu item.
8 Press or repeatedly until Behind PBX (Dial Tone Detect Off) appears.
9 Press to save and exit.
Setting the distinctive ring
Distinctive ring is a service provided by some telephone companies that assigns multiple phone numbers to a single
telephone line. If you subscribe to this service, you can program your printer to have a distinctive ring pattern and
phone number for incoming faxes.
1 From the control panel, press or repeatedly until Fax is highlighted.
2 Press .
3 Press or repeatedly until the Fax Setup submenu is highlighted.
4 Press .
5 Press or repeatedly until the Ringing and Answering submenu is highlighted.
6 Press .
7 Press or repeatedly until you reach the Distinctive Ring menu item.
8 Press or repeatedly until the ring pattern you want appears.
9 Press to save and exit.
Setting the number of rings before receiving a fax automatically
1 Make sure that Auto Answer is on. For more information, see “Setting Auto Answer to On” on page 79.
Note: An indicator, resembling a telephone handset with the word FAX under it, is shown in the top left corner
of the display when Auto Answer is on.
2 From the control panel, press or repeatedly until Fax is highlighted.
3 Press .
4 Press or repeatedly until the Fax Setup submenu is highlighted.
5 Press .
6 Press or repeatedly until the Ringing and Answering submenu is highlighted.
7 Press .
8 Press or repeatedly until you reach the Pick-up On menu item.
9 Press or repeatedly until the setting you want appears.
10 Press to save and exit.
Faxing
83
To Next Page
Loading...
