Lexmark XM3142 - Copying on Letterhead; Copying on both Sides of the Paper; Reducing or Enlarging Copies; Copying Multiple Pages Onto a Single Sheet

Copying on letterhead
1 Load an original document into the ADF tray or on the scanner glass.
2 From the home screen, touch Copy > Copy From > select the size of the original document.
3 Touc h Copy To, and then select the paper source that contains the letterhead.
If you loaded the letterhead into the multipurpose feeder, then touch Copy To > Multipurpose Feeder >
select a paper size > Letterhead.
4 Copy the document.
Copying on both sides of the paper
1 Load an original document into the ADF tray or on the scanner glass.
2 From the home screen, touch Copy > Settings > Sides.
3 Touc h 1 sided to 2 sided or 2 sided to 2 sided.
4 Copy the document.
Reducing or enlarging copies
1 Load an original document into the ADF tray or on the scanner glass.
2 From the home screen, touch Copy > Settings > Scale > select a scale value.
Note: Changing the size of the original document or output after setting Scale restores the scale value to
Auto.
3 Copy the document.
Copying multiple pages onto a single sheet
1 Load an original document into the ADF tray or on the scanner glass.
2 From the home screen, touch Copy > Settings > Pages per Side.
3 Enable the setting, and then select the number per side and page orientation.
4 Copy the document.
Collating copies
1 Load an original document into the ADF tray or on the scanner glass.
2 From the home screen, touch Copy > Settings > Collate > On [1,2,1,2,1,2].
3 Copy the document.
Copy 69