Lexmark XM3150 - Page 199

Paper Saver Orientation
Auto
Landscape
Portrait
Specify the orientation of a multiple‑page document.
Note: Auto is the factory default setting.
Paper Saver Border
None
Solid
Print a border on each page image.
Note: None is the factory default setting.
Separator Sheets
Off
Between Copies
Between Jobs
Between Pages
Specify whether blank separator sheets are inserted.
Notes:
• Off is the factory default setting.
• Between Copies inserts a blank sheet between each copy of a print job if Collate is set to
(1,2,3) (1,2,3). If Collate is set to (1,1,1) (2,2,2), then a blank page is inserted between each
set of printed pages.
• Between Jobs inserts a blank sheet between print jobs.
• Between Pages inserts a blank sheet between each page of the print job. This setting is
useful when printing transparencies or when inserting blank pages in a document.
Separator Sheet Source
Tray [x]
Multipurpose Feeder
Specify the paper source for separator sheets.
Note: Tray 1 is the factory default setting.
Blank Pages
Do Not Print
Print
Specify whether blank pages are inserted in a print job.
Note: Do Not Print is the factory default setting.
OCR Settings menu
Use To
Auto Rotate
On
Off
Automatically rotate scanned documents for proper orientation.
Note: On is the factory default setting.
Despeckle
Off
On
Remove specks from a scanned image.
Note: Off is the factory default setting.
Inverse Detection
On
Off
Recognize and make the white text on a black background editable.
Note: On is the factory default setting.
Auto Contrast Enhance
Off
On
Automatically adjust the contrast to improve OCR quality.
Note: Off is the factory default setting.
Understanding the printer menus 199