Lexmark XM3150 Compatibility Guide

Overview of label support
Paper source
Labels
Paper Dual‑web paper Polyester Vinyl
1, 2
Standard and optional 550‑sheet trays
180 g/m
2
180 g/m
2
220 g/m
2
300 g/m
2
Multipurpose feeder
199 g/m
2
199 g/m
2
220 g/m
2
260 g/m
2
1
Vinyl labels are supported only when the printing environment and media are 20–32.2°C (68–90°F).
2
The skew performance of heavy vinyl labels may be enhanced by feeding from an optional 500‑sheet drawer if placement
of the image is critical.
Media specifications
Labels Width: 76.2–139.7 mm (3–8.5 in.)
Length: 127–355.6 mm (5–14 in.)
Weight:
160–220 g/m
2
160–300 g/m
2
(Vinyl)
Thickness: Up to 0.25 mm
Smoothness: 50–300 Sheffield*
* 50–150 Sheffield is optimal. This printer may support labels with smoothness of less than 50 Sheffield
such as coated paper, polyester, vinyl, or other synthetic facestock paper. Using media higher than 200
Sheffield could result in print quality degradation.
Card stock Width: 76.2–139.7 mm (3–8.5 in.)
Length: 127–355.6 mm (5–14 in.)
Weight:
Up to 216 g/m
2
Use only materials recommended for use with laser printers.
To prevent specialty media sheets from sticking together, remove each sheet from the bin as it is printed.
Card stock and label guidelines
When printing on labels:
• Set Paper Type to Labels from the printer driver.
• Use A4- or letter-size paper.
• Do not use label sheets with a slick backing material.
• Do not print within 1 mm (0.040 inch) of the die-cut.
• Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Partial
sheets will also contaminate your printer and your cartridge with adhesive, and could void your printer and cartridge
warranties.
• Use labels that can withstand temperatures of 180°C (356°F) without sealing, excessive curling, wrinkling, or
releasing hazardous emissions.
• Verify that the adhesive material of the label can tolerate a fusing temperature of 180°C (356°F) for 0.1 second.
• Use labels that can withstand pressure of 25 pounds per square inch (psi).
• Do not print within 1 mm (0.040 inch) of the edge of the label, of the perforations, or between die-cuts of the label.
Printer specifications 142

Lexmark XM3150 Specifications

General

Duplex printing	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	6.5 s
Print speed (black, normal quality, A4/US Letter)	47 ppm
All-in-one functions	Copy, Fax, Print, Scan
Color all-in-one functions	Scan
Digital sender	No
Maximum duty cycle	150000 pages per month
Recommended duty cycle	2000 - 15000 pages per month
Copier resize	25 - 400 %
Maximum copy resolution	- DPI
Copy speed (black, normal quality, A4)	47 cpm
Scan speed (black)	48 ppm
Scan speed (color)	32 ppm
Duplex scan speed (black)	21 ppm
Duplex scan speed (color)	14 ppm
Optical scanning resolution	600 x 1200 DPI
Faxing	Mono faxing
Modem speed	33.6 Kbit/s
Total input capacity	650 sheets
Total output capacity	250 sheets
Maximum input capacity	2300 sheets
Multi-Purpose tray input capacity	100 sheets
Envelopes sizes	7 3/4, 9, 10, DL
Maximum print size	216 x 356 mm
Paper tray media types	Card stock, Envelopes, Labels, Plain paper, Transparencies
Non-ISO print media sizes	Executive (184 x 267mm), Folio (media size), Legal (media size), Letter (media size), Oficio (media size)
ISO A-series sizes (A0...A9)	A4, A5, A6
JIS B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Display	LCD
Control type	Touch
Product color	Grey, White
Display diagonal	7 \
Market positioning	Business
Direct printing	-
Standard interfaces	Ethernet, USB 2.0
Optional connectivity	Parallel, Serial (RS-422), Wireless LAN
Internal memory	1024 MB
Maximum internal memory	3072 MB
Sound pressure level (copying)	56 dB
Sound pressure level (printing)	55 dB
Power consumption (average operating)	- W
Operating altitude	0 - 2896 m
Operating temperature (T-T)	16 - 32 °C
Operating relative humidity (H-H)	8 - 80 %
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	479 mm
Width	499 mm
Height	561 mm
Weight	23600 g