Imaging unit nearly low
[84.xy] 270
Imaging unit very low, [x]
estimated pages remain
[84.xy] 270
Incompatible tray [x] [59] 271
Incorrect paper size, open
[paper source] [34] 271
Insert Tray [x] 271
Install Tray [x] 271
Insucient memory to collate
job [37] 271
Insucient memory to support
Resource Save feature
[35] 272
Insucient memory, some Held
Jobs were deleted [37] 272
Insucient memory, some held
jobs will not be restored
[37] 272
Load [paper source] with
[custom string] [paper
orientation] 272
Load [paper source] with
[custom type name [paper
orientation] 272
Load [paper source] with [paper
size] [paper orientation] 272
Load [paper source] with [paper
type] [paper size] [paper
orientation] 272
Load multipurpose feeder with
[custom string] [paper
orientation] 273
Load multipurpose feeder with
[custom type name] [paper
orientation] 273
Load multipurpose feeder with
[paper size] [paper
orientation] 273
Load multipurpose feeder with
[paper type] [paper size] [paper
orientation] 273
Maintenance kit low [80.xy] 273
Maintenance kit nearly low
[80.xy] 274
Maintenance kit very low, [x]
estimated pages remain
[80.xy] 274
Memory full [38] 274
Memory full, cannot print
faxes 274
Misfeed cleared, extra sheets in
output bin [24y.xx] 274
Network [x] software error
[54] 274
No analog phone line
connected to modem, fax is
disabled. 274
Non‑Lexmark [supply type], see
User’s Guide [33.xy] 274
Not enough free space in flash
memory for resources
[52] 275
Paper changes needed 275
Parallel port [x] disabled
[56] 275
Printer had to restart. Last job
may be incomplete. 275
Reinstall missing or
unresponsive cartridge
[31.xy] 276
Remove defective disk [61] 276
Remove packaging material,
[area name] 276
Remove paper from standard
output bin 276
Replace all originals if restarting
job. 276
Replace cartridge, 0 estimated
pages remain [88.xy] 276
Replace cartridge, printer region
mismatch [42.xy] 276
Replace defective imaging unit
[31.xy] 277
Replace imaging unit, 0
estimated pages remain
[84.xy] 277
Replace jammed originals if
restarting job. 277
Replace last scanned page and
jammed originals if restarting
job. 278
replace maintenance kit to
resume printing [80.xy] 278
replace maintenance kit,
recommended life exceeded
[80.xy] 278
Replace missing cartridge
[31.xy] 278
replace missing fuser
[80.xx] 278
Replace missing imaging unit
[31.xy] 278
Replace roller kit [81.xx] 278
Replace separator pad 279
Replace unsupported cartridge
[32.xy] 279
Replace unsupported imaging
unit [32.xy] 279
Replace wiper 280
Restore held jobs? 280
Scan document too long 280
Scanner automatic feeder cover
open 280
Scanner disabled by admin
[840.01] 280
Scanner disabled. Contact
system administrator if
problem persists.
[840.02] 280
Scanner jam access cover
open 280
Scanner jam, open and close
automatic feeder top cover
[2yy.xx] 280
Scanner jam, remove all
originals from the scanner
[2yy.xx] 281
Scanner jam, remove jammed
originals from the scanner
[2yy.xx] 281
Scanner maintenance required
soon, use ADF Kit [80] 281
Scanner maintenance required,
use ADF Kit [80] 281
Serial port [x] disabled [56] 281
SMTP server not set up. Contact
system administrator. 281
Some held jobs were not
restored 281
Standard network software
error [54] 281
Standard USB port disabled
[56] 282
Supply needed to complete
job 282
The device is operating in safe
mode. Some print options may
be disabled or provide
unexpected results. 282
Too many disks installed
[58] 282
Too many flash options installed
[58] 282
Index 355
To Next Page
Loading...
