Lexmark XM7355 User Manual

2 Locate the serial number at the left side of the printer.
Selecting a location for the printer
• Leave enough room to open trays, covers, and doors and to install hardware options.
• Set up the printer near an electrical outlet.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, do not place or use this product
near water or wet locations.
• Make sure that airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical
Committee 156 standard.
• Provide a flat, sturdy, and stable surface.
• Keep the printer:
– Clean, dry, and free of dust
– Away from stray staples and paper clips
– Away from the direct
airflow
of air conditioners, heaters, or ventilators
– Free from direct sunlight and humidity extremes
• Observe the recommended temperatures and avoid fluctuations.
Ambient temperature 10 to 32.2°C (50 to 90°F)
Storage temperature -40 to 43.3°C (-40 to 110°F)
• Allow the following recommended amount of space around the printer for proper ventilation:
Learning about the printer 12

Lexmark XM7355 Specifications

General

Print Speed	Up to 55 ppm
Scan Technology	CIS
Standard Connectivity	USB, Ethernet, Wi-Fi
Print Resolution	1200 x 1200 dpi
Processor Speed	1.2 GHz
Scanner Type	Flatbed, ADF
ADF Capacity	150 sheets
Fax Speed	33.6 kbps
Functions	Print, Copy, Scan, Fax
Copy Speed	Up to 55 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Mobile Printing	Yes
Operating Systems Supported	Windows, Mac OS, Linux
Print Technology	Laser
Maximum Monthly Duty Cycle	300, 000 pages
Recommended Monthly Page Volume	Up to 50, 000 pages
Duplex Printing	Yes
Maximum Input Capacity	3, 300 sheets
Maximum Memory	6 GB
Hard Disk	320 GB
Paper Capacity	650 sheets
Standard Memory	2 GB