Menu item Description
Adjust ADF Skew
O*
On
Set the printer to adjust the skewed images from documents that are scanned
from the ADF.
Note: An asterisk (*) next to a value indicates the factory default setting.
Flash Drive Print
Menu item Description
Number of Copies
1–9999 (1*)
Set the number of copies.
Paper Source
Tray [x] (1*)
Multipurpose Feeder
Manual Paper
Manual Envelope
Set the paper source for the print job.
Collate
(1,1,1) (2,2,2)
(1,2,3) (1,2,3)*
Keep the pages of a print job stacked in sequence, particularly when printing
multiple copies of the job.
Sides
1‑Sided*
2‑Sided
Specify whether to print on one side or both sides of the paper.
Staple
O*
1 staple, top left corner
2 staples, left
1 staple, top right corner
2 staples, top
1 staple, bottom left corner
2 staples, bottom
1 staple, bottom right corner
2 staples, right
Specify the staple position for all print jobs.
Note: This menu item appears only when a staple finisher is installed.
Hole Punch
O*
2 holes
3 holes
Set the punch mode for all print jobs.
Note: This menu item appears only when a staple
finisher
is installed.
Note: An asterisk (*) next to a value indicates the factory default setting.
Understanding the printer menus 139
To Next Page
Loading...
