EasyManua.ls Logo

Lexus ES 200 - Turn Signal Lever

Lexus ES 200
518 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
187
4
4-2. Driving procedures
Driving
range.
■ S mode
● 8-speed models: When the shift range is
7 or lower, holding the shift lever toward
“+” sets the shift range to 8.
6-speed models: When the shift range is
5 or lower, holding the shift lever toward
“+” sets the shift range to 6.
● To prevent the engine from over-revving,
upshifting may automatically occur.
● To protect the automatic transmission, a
function is adopted that automatically
selects a higher shift range when the fluid
temperature is high.
■ Downshifting restriction warning
buzzer
To help ensure safety and driving perfor-
mance, downshifting operation may some-
times be restricted. In some circumstances,
downshifting may not be possible even
when the shift lever or paddle shift switch is
operated. (A buzzer will sound twice.)
■ If the S indicator does not come on or
the D indicator is displayed even after
shifting the shift lever to S
This may indicate a malfunction in the auto-
matic transmission system. Have the vehicle
inspected by your Lexus dealer immedi-
ately. (In this situation, the transmission will
operate in the same manner as when the
shift lever is in the D position.)
1 Right turn
2 Lane change to the right (move the
lever partway and release it)
The right hand signals will flash 3 times.
3 Lane change to the left (move the
lever partway and release it)
The left hand signals will flash 3 times.
4 Left turn
■ Turn signals can be operated when
The engine switch is in IGNITION ON
mode.
■ If the indicator flashes faster than usual
Check that a light bulb in the front or rear
turn signal lights has not burned out.
■ If the turn signals stop flashing before a
lane change has been performed
Operate the lever again.
Turn signal lever
Operating instructions

Table of Contents