Lexus ES 200 - Page 337

336
5-3. Using the air conditioning system
■ Operation condition
The seat heaters can be used when the
engine switch is in IGNITION ON mode.
■ When AUTO mode is selected
The seat heaters function may turn off
according to the air conditioning set tem-
perature, outside temperature, etc.
■ Stored settings
When the engine switch is turned to IGNI-
TION ON mode, the stored settings are
recalled.
Each time the switch is pressed, the
operation condition changes as fol-
lows.
AUTO (lit)  Hi (3 segments lit) 
Mid (2 segments lit)  Lo (1 segment
lit)  Off
The AUTO indicator and/or level indi-
cator illuminates during operation.
■ Operation condition
The engine switch is in IGNITION ON
mode.
■ Air conditioning system-linked control
mode
When the seat ventilator fan speed level is
Hi (when AUTO is selected), the seat venti-
lator fan speed becomes higher according
to the fan speed of the air conditioning sys-
tem.
■ When AUTO mode is selected
The seat ventilators function may turn off
according to the air conditioning set tem-
perature, outside temperature, etc.
■ Stored settings
When the engine switch is turned to IGNI-
TION ON mode, the stored settings are
recalled.
■ Main display
Using the touchpad of the Remote
Touch, select the button on the screen.
to can be adjusted by perform-
ing the following operations.
Flick operation: Move the pointer to
the desired item and flick the touchpad
up or down.
WARNING
■ To prevent causes of overheating and
minor burn injuries
Observe the following precautions when
using a seat heater:
● Do not cover the seat with a blanket or
cushion when using the seat heater.
● Do not use seat heater more than nec-
essary.
Seat ventilators
A
Control screen
B
A
C