473
8
8-1. Specifications
Vehicle specifications
6AR-FSE engine
2GR-FKS engine and 6AR-FSE engine
■ Oil capacity (Drain and refill [Reference
*
])
*
: The engine oil capacity is a reference quantity to be used when changing the engine oil.
Warm up and turn off the engine, wait more than 5 minutes, and check the oil level on the
dipstick.
■ Engine oil selection
“Toyota Genuine Motor Oil” is used in
your Lexus vehicle. Use Lexus
approved “Toyota Genuine Motor Oil”
or equivalent to satisfy the following
grade and viscosity.
Oil grade:
0W-20, 5W-20, 5W-30 and 10W-
30:
API grade SL “Energy-Conserving”,
SM “Energy-Conserving”, SN
“Resource-Conserving” or SN PLUS
Model 6AR-FSE
Type 4-cylinder in line, 4-cycle, gasoline
Bore and stroke 86.0 86.0 mm (3.39 3.39 in.)
Displacement
1998 cm
3
(121.9 cu.in.)
Valve clearance Automatic adjustment
Drive belt tension Automatic adjustment
Fuel
Fuel type Unleaded gasoline only
Research Octane Number 91 or higher
Fuel tank capacity (Reference) 60 L (15.9 gal., 13.2 Imp.gal.)
Lubrication system
2GR-FKS engine 6AR-FSE engine
With filter
Without engine oil cooler:
5.4 L (5.7 qt., 4.8 Imp.qt.)
With engine oil cooler:
5.5 L (5.8 qt., 4.8 Imp.qt.)
4.4 L (4.6 qt., 3.9 Imp.qt.)
Without filter 5.3 L (5.6 qt., 4.7 Imp.qt.) 4.0 L (4.2 qt., 3.5 Imp.qt.)
To Next Page
