57
1
1-2. Child safety
For safety and security
■ Compatibility of each seating posi-
tion with child restraint systems
Left-hand drive vehicles
Right-hand drive vehicles
*1
: Move the front seat fully rearward. If the
passenger seat height can be adjusted,
move it to the upper most position.
*2
: Adjust the seatback angle to the most
upright position. When installing a for-
ward-facing child seat, if there is a gap
between the child seat and the seat-
back, adjust the seatback angle until
good contact is achieved.
*1, 2, 3
*4
*2, 3
*3
*2, 3
Suitable for fixed with vehicle seat
belt “universal” category child
restraint system.
Suitable for i-Size and ISOFIX
child restraint system.
This seat is fitted with a Top tether
anchorage point.
Never use a rear-facing child
restraint system on the front pas-
senger seat when the airbag man-
ual on-off switch is on or without
the airbag manual on-off switch.
To Next Page
Loading...
