Symptom Likely cause Solution
The screen is dif-
ficult to see
● The v
ehicle is in a dark area or
it is night.
● The temperature around the
lens is either high or low.
● The outside temperature is low.
● There are water droplets on the
camera.
● It is raining or humid.
● Foreign matter (mud etc.) is
stuck to the camera.
● Sunlight or headlights are shin-
ing directly into the camera.
● The vehicle is under fluorescent
lights, sodium lights, mercury
lights, etc.
Visually check your vehicle’s sur-
roundings while you are driving.
(Use the Lexus parking assist
monitor again once the camera
and conditions have improved.)
The procedure for adjusting the
picture quality of the Lexus park-
ing assist monitor is the same as
the procedure for adjusting the
multimedia screen.
The image is
blurr
y
Dirt or foreign matter, such as wa-
ter droplets, snow, or mud, has
stuck to the camera lens.
Splash the camera with a large
amount of w
ater and then wipe
the camera lens clean with a soft,
damp cloth.
Operate the dedicated camera
cleaning washer and clean the
camera lens. For details, refer
to separate "OWNER’S MAN-
UAL".
*2
The screen is
misaligned
The camera has received a strong
impact.
Have the vehicle inspected by
y
our Lexus dealer.
The guide lines
ar
e significantly
misaligned
The camera position is misaligned.
Have the vehicle inspected by
your Lexus dealer.
● The vehicle is tilted (There is a
heavy load on the vehicle, tire
pressure is low due to a tire
puncture, etc.).
● The vehicle is on an incline.
Visually check your vehicle’s sur-
roundings while you are driving.
8-1. Lexus parking assist monitor
233
8
Parking assist system
To Next Page
Loading...
