Connecting with a Bluetooth
®
de
vice
Connection with a Bluetooth
®
device is required to use various function of the
multimedia system. There are 2 connection methods, automatic and manual.
INFORMATION
● R
efer to the Bluetooth
®
device's instruction manual for information on how to operate
the Bluetooth
®
device.
● If multimedia system behavior is unstable when connecting a cellular phone, end the
call and try connecting again.
● A connection cannot be made if Bluetooth
®
on the Bluetooth
®
device is not turned
on.
● When connection of the Bluetooth
®
device is completed, a message indicating so will
be displayed at the top of the screen.
● While the Bluetooth
®
device is connected, the Bluetooth
®
connection status icon is
displayed.
● The display area may illuminate and stay on while the engine switch is turned on,
depending on the model of cellular phone. If this occurs, turn illumination off on the
cellular phone. (For information on setting, refer to the cellular phone instruction
manual)
● The Bluetooth
®
function cannot be used on the device connected as Apple CarPlay.
● The Bluetooth
®
function except the hands-free function cannot be used on the device
connected as Android Auto.
■ Bluetooth
®
r
econnection
If a Bluetooth
®
connection that was once established is disconnected while the
engine switch is turned on, a reconnection will be automatically attempted.
■ Number of Bluetooth
®
device connections
● When a driver is set
Up to 2 hands-free phones and 1 audio device will be connected automatically.
(The hands-free phone and audio device can also be set as the same device.)
● When a driver is not set
Up to 1 hands-free phone and 1 audio device will be connected automatically.
(The hands-free phone and audio device can also be set as the same device.)
3-1. Using the Bluetooth
®
function
96
To Next Page
Loading...
