Display mode when the shift lever is in "D" or "N"
Y
ou can check for nearby pedestrians, bicycles, and vehicles at intersections with
poor visibility and T-junctions by displaying vision of your surroundings on the
screen. This mode also provides support to check both sides of the vehicle for
safety, avoid collisions on narrow roads, and pulling over to the side of the road.
1. Shift the shift lever to "D" or "N".
2. Press the camera switch.
● The mode changes every time you press the camera switch.
● If the cornering view mode is on and you turn the steering wheel more than
180 degrees from the straight position, the display will change from side
clearance view & panoramic view to cornering view & panoramic view.
■ Wide front view & panoramic view
A
Front distance guide lines
Display
s about 3 ft. (1 m) in front of the vehicle.
B
Forward estimated course lines
Display
s course lines that are linked to operation of the steering wheel. (Yellow)
These lines are displayed when the steering wheel is turned more than 90 degrees
from the straight position.
C
Intuitive parking assist
Display
s an indicator on the screen and sounds a buzzer when an object is detected
by a sensor. (For details about the intuitive parking assist, see the separate "OWNER’S
MANUAL".)
D
FCTA (Front Cross Traffic Alert)
*1
8-2. Panoramic view monitor
240
To Next Page
Loading...
