Display mode when the shift lever is in "P"
This is a mode that display
s images combined from the cameras to enable you
to check obstacles around the vehicle. Images are displayed as if seen from the
driver’s seat and on an angle from above the vehicle.
1. Shift the shift lever to "P".
2. Press the camera switch.
● The mode changes every time the display mode switching button is
touched.
● Pressing the camera switch again returns the display to the previous screen,
such as the navigation screen.
■ See-through view
■ Moving view
A
Screen off button
T
urns off the camera screen and returns the previous screen, such as the navigation.
B
Display mode switching button
S
witches between see-through view and moving view.
C
Rotation pause/resume button
P
auses and resumes the rotation of the display.
D
Customize settings button
8-2. Panoramic view monitor
238
To Next Page
Loading...
