Registering face identification
Face identification enables the system to identify the driver.
1 T
ouch [
] on the main menu.
2 T
ouch [Personal info] on the submenu.
3 Touch [Setup face].
4 Carefully read the Terms of Service and touch [Accept].
5 Look directly at the driver monitor
camera, ensure only your face is be-
ing displayed, and then touch [Begin].
6 The system will start scanning your face.
● Once registration is complete, a message is displayed on the screen.
● If an error message appears, follow the on-screen instructions and try again.
Troubleshooting
If there is a problem with the user profile function, first check the table below.
Problem Likely cause Solution
Unable to load saved profile
System is not loading the
pr
eviously saved profile.
Turn the Bluetooth
®
setting
on and ensure the device is
paired with the system and
set as primary device.
Unable to load saved pro-
file with Bluetooth
®
setting
turned on
Ensure Bluetooth
®
setting is
t
urned on and Lexus app is
running on device.
Forgot PIN PIN needs to be reset.
PIN can be reset using the
L
exus app.
*3 : Cannot be used with fleet v
ehicles such as rental cars.
2-3. Driver settings
54
To Next Page
Loading...
