Lexus LC500 - Erasing the Entire Homelink Memory; Operating Homelink

255
5-6. Using the other interior features
5
Interior features
Press the appropriate HomeLink
®
button. The HomeLink
®
indicator light
should turn on.
The status of the opening and closing
of a garage door is shown by the indi-
cators.
Opening
Closing
This function is only available if the garage
door opener motor used is a compatible
device. (To check device compatibility,
refer to www.homelink.com.)
The indicators can operate within
approximately 820 ft. (250 m) of the
garage door. However, if there are
obstructions between the garage door
and the vehicle, such as houses and
trees, feedback signals from the
garage door may not be received.
To recall the previous door operation
status, press and release either
HomeLink
®
buttons and
or and simulta-
neously. The last recorded status will
be displayed for 3 seconds.
Press and hold the 2 outside buttons
for 10 seconds until the HomeLink
®
indicator light changes from continu-
ously lit (orange) to rapidly flashing
(green).
If you sell your vehicle, be sure to erase the
programs stored in the HomeLink
®
mem-
ory.
Operating HomeLink
®
Color Status
Orange (flashing)
Currently open-
ing/closing
Green
Opening/closing
has completed
Red (flashing)
Feedback signals
cannot be received
A
B
Erasing the entire HomeLink
®
memory (all three codes)