83
2-1. Instrument cluster
2
Vehicle status information and indicators
Select to display warning messages
and measures to be taken if a malfunc-
tion is detected. (P.323)
Select to change the meter display set-
tings.
■ Language
Select to change the language on the
display.
■ Units
Select to change the unit of measure
for fuel consumption.
■ Eco Driving Indicator Light
Select to activate/deactivate the Eco
Driving Indicator Light.
■ Drive information 1/Drive informa-
tion 2
Select to select up to 2 items that will
be displayed on the “Drive Info 1”
screen and “Drive Info 2” screen
respectively. (P.80)
■ Pop-up display
Select to set the following pop-up dis-
plays, which may appear in some situa-
tions, on/off.
• Route guidance display of the navi-
gation system-linked system
• Making call display of the hands-
free phone system
• Audio system operation display
• Voice recognition display
• Instrument panel brightness adjust-
ment display
■ Ring position memory
Select to change the meter ring posi-
tion when the engine is started.
The position before the engine is
stopped or the center position can be
selected.
■ Accent color
Select to change the accent color on
the screen, such as the cursor color.
■ Rev indicator
Select to set the rev indicator on/off.
When set to on, proceed to select the
engine speed at which the rev indica-
tor will be displayed.
■ Rev peak
Select to set the rev peak on/off.
■ Clock
Select to switch between 12-hour dis-
play and 24-hour display.
■ Initialization
Select to reset the meter display set-
tings.
■ Suspension of the settings display
In the following situations, operation of the
settings display will be temporarily sus-
pended.
● When a warning message appears on the
multi-information display
● When the vehicle begins to move
■ Customization
The settings can be changed on of the
multi-information display.
● Settings of the driving assist systems
(P.367)
● Vehicle settings (P.86, 265, 286,
287, 367)
Warning message display
Settings display
To Next Page
Loading...
