32
Turn S igna l Lever
Right turn signal
Left turn signal
To signal a lane change, move the lever partway
and then release it. The turn signals will flash 3
times.
Cruise Control (If Equipped)
Indicator
Cruise control switch
■ Setting the speed
Press the “ON-OFF” button.
The system will turn on.
Accelerate or decelerate to the desired
speed, and then push the lever down.
This sets the speed in the cruise control
memory.
Cruise control allows the driver to maintain a constant speed without having to operate
the accelerator pedal.
Use for highway driving or when traveling at a constant speed for long periods of time.