STARTING AND DRIVING
163
5. Release the parking brake and brake pedal. Depress the
accelerator pedal slowly for smooth starting.
In normal cruising, the vehicle will start in the first gear and
automatically shift up to the most suitable gear. On inclines, declines
or winding roads, etc., the vehicle shifts up and down automatically
according to the running conditions to obtain the suitable driving
power and engine braking.
In ”4” position, the automatic transmission system will select the
most suitable gear for the running conditions such as hill climbing,
hard towing, etc.
If you need to accelerate rapidly while driving, depress the
accelerator pedal to the full throttle position. This provides more
acceleration by automatically downshifting the transmission to the
next lower gear or beyond, depending on the vehicle speed.
If engine braking is needed, such as in descending a long hill, see ”(b)
Using engine braking”.
(b) Using engine braking
31L010-3
To use the braking power of the engine, downshift the transmission
in the way described below:
1
Shift into the ”4” position. The transmission will downshift to
the fourth gear and engine braking will be obtained.
When the cruise control is being used, even if you downshift
from ”D” to ”4”, engine braking will not be applied because the
cruise control is not cancelled. If you need to decrease the
vehicle speed, see page 170.
2
Shift into the ”3” position. The transmission will downshift to
the third gear when the vehicle speed is or becomes lower than
154 km/h (96 mph) and more powerful engine braking will be
obtained.
To Next Page
Loading...
