STARTING AND DRIVING
169
Turning on the system
31L067
To operate the cruise control, push the main switch. This turns the
system on. The indicator light in the instrument cluster shows that
you can now set your desired cruising speed. Another push on the
switch will turn the system completely off.
When the ignition key is turned off, the main switch is also
automatically turned off. To use the cruise control again, push the
main switch again to turn it on.
CAUTION
To avoid accidental cruise control engagement, keep the main
switch off when not using the cruise control.
Setting at a desired speed
31L068
The transmission must be in ”D” or ”4” before you set the cruise
control speed.
Bring the vehicle to the desired speed, press the control lever
downward in the ”SET/COAST” direction and release it. This sets
the vehicle at that speed. Now you may take your foot off the
accelerator pedal. If you need acceleration − for example, when
passing − depress the accelerator pedal enough for the vehicle to
exceed the set speed. When you release the accelerator pedal, the
vehicle will return to the speed set prior to the acceleration.
Cancelling the preset speed
You can cancel the preset speed by either of the following:
a. Pulling the control lever in the ”CANCEL” direction.
b. Depressing the brake pedal.
To Next Page
Loading...
