ELECTRICAL COMPONENTS
258
CHECKING AND REPLACING THE
BLADE TYPE FUSES
64L011-1
"Driver’s side instrument panel
64L012-2
"Engine compartment
1
Spare fuses
2
Pull−out tool
1. Turn the ignition switch off and open the fuse box lid.
Determine which fuse may be causing the problem. The lid of the
fuse box shows the name of the circuit for each fuse.
64L013
2. Make sure the inoperative component is turned off. Pull the
suspected fuse straight out with the pull−out tool and check it.
If it has blown, push a new fuse into the clips.
To Next Page
Loading...
