Lexus RX300 2003 - Rear Seats

2003 RX300 from Aug. 02’ Prod. (OM48442U)
16R102a
5
Push the seat position control switch downward to lower
the seat at the same level as the rear seat (driver’s seat
only).
After returning the seat to its original position, be certain to
replace the head restraint.
CAUTION
 Do not allow passengers to ride on the flattened seat
while driving; use the seat in the normal position.
 After putting back the seat, try pushing the seatback
forward and rearward to make sure it is secured in
place. Be certain to replace head restraint.
REAR SEATS
Sliding and reclining rear seats
16R283
Hold the center of the lever and pull it up. Then slide the
seat to the desired position with slight body pressure and
release the lever.
When you move the seats forward and unlock the seatbacks,
you can tilt the seatbacks a little rearward.