2003 RX300 from Aug. 02’ Prod. (OM48442U)
(a) Climate control
SETTING OPERATION – automatic control
20R003a
1. Push the “AUTO” button.
An indicator light will illuminate to show that the automatic
operation mode has been selected.
Air flow quantity, switching of the diffusers, on–off of the air
conditioning and switching of the air intake between
RECIRCULATED AIR and OUTSIDE AIR are automatically
adjusted. The operation status is shown by each indicator.
When one of the manual control buttons is depressed while
operating in automatic mode, the mode relevant to the
depressed button is set. Other conditions continue to be
adjusted automatically.
Push the “OFF” button to turn the air conditioning system off.
20R004a
2. Turn the temperature selector knob until the desired
temperature is displayed.
The temperature selector knob is used to set the desired
passenger compartment temperature. The temperature of air
delivered to the passenger compartment will be controlled
automatically according to the setting. The figures on the panel
indicate degrees Fahrenheit or Centigrade.
When you adjust the temperature selector knob to maximum
cooling, the “MAX. COLD” will appear on the display and the
air intake mode will be automatically changed to
RECIRCULATE AIR mode.
To Next Page
Loading...
