6. When the wall clock detects the atomic clock signal, the signal strength
indicator will be animated.
5. After 3 minutes of sensor pairing time, the wall clock will automatically receive
atomic clock signal, the tower icon will be flashing.
7. Put the wall clock away from interference, such as electronic devices.
(TV, computer, microwave, radio, etc.)
8. When the wall clock signal is received successfully, the time and date will be
updated. The Atomic Time tower icon will be solid.
6
3. Keep the outdoor sensor 5-10 feet from the wall clock.
4. When the RF connection is established, the temperature readings will appear
on the station.
To Next Page
Loading...