First of all, it needs to do the pairing between outdoor remote sensor and wall
clock. Please follow below procedures to pair the sensor.
1. Insert 4 new “AA” batteries into the wall clock.
The screen is turned on. It starts to search sensor and register the received
sensor. During pairing, the signal strength indicator will animate until the
sensor signal is received or for 3 minutes if no signal available.
2. Slide the switch to CH1 of the outdoor sensor and Insert 2 new “AAA”
batteries. The wireless remote sensor will transmit the signal and LED will
flash during transmission.
5
4.1 PAIR THE OUTDOOR REMOTE SENSOR
4 FIRST TIME TO USE
To Next Page
Loading...
