9. Allow the outdoor sensor and wall clock to sit together for 15 minutes to
establish a strong connection.
10. Do not press button for 15 minutes.
11. After 15 minutes, place the sensor in a shaded outdoor location.
7
• The wall clock automatically begins search WWVB signal and update
the time every day at 1:00am，2:00am，3:00am，4:00am，5:00am.
• The Atomic Time tower icon will flash while searching and will be solid
when it has connected.
Manual RCC Reception
You can receive the atomic clock signal manually. In Normal display, press and
hold the ▼/RCC over 3 sec to receive the atomic clock signal manually.
The tower icon is flashing and will start atomic clock reception.
When the atomic clock signal is received successfully, the time and date
will be updated.
During atomic clock reception, press and release "▼/RCC" key over 3s to
exit atomic clock reception.
For information about WWVB, visit
www.nist.gov/pml/div688/grp40/wwvb.cfm
5 ATOMIC CLOCK RECEPTION
To Next Page
Loading...
