15
16 IMPORTANT PLACEMENT GUIDELINES
• Mounting under an eave or deck rail works well.
• Mount the remote sensor on the North side where to prevent the sun from
causing incorrect readings
• Be sure the outdoor sensor is mounted vertically to drain moisture.
• Mount at least 6 feet in the air for a strong RF (radio frequency) signal.
• To prevent wireless interference, place units at least 3 ft (0.9 m) away from
electronic devices (TV, computer, microwave, radio, etc.).
• To maximize atomic signal reception, place the weather station away from large
metallic items, thick walls, metal surfaces, or other objects that may limit radio
communication.
• The maximum wireless transmission range must be within 300 feet (100m) in
open air, not including walls and floors.
15 FACTORY RESTART
If there is malfunction, the Factory Restart is a great way to return your station to
"out of the box" condition.
15.1 FACTORY RESTART
1.) Remove all power (batteries and AC-AC adaptor) from outdoor sensors and
weather station.
2.) Leave both units without power for 10 minutes. (very important).
3.) Follow the operation “4 FIRST TIME TO USE” to start the pair the sensor.
To Next Page
Loading...
