iPECS eMG80/100& eMG800 & UCP & vUCP
Feature Description and Operation Manual Issue 2.4
249
2.76.4 System Speed Dial
Description
Commonly dialed numbers can be stored by the System Attendant or by the Administrator in Web Admin for
easy access by stations allowed use of System Speed Dial bins.
With eMG80/100, up to 3000 System Speed Dial numbers are available and with eMG800, up to 8000 System
speed dial numbers are available and with UCP, up to 1200 systems speed dial numbers are available.
Each Speed Dial number can be up to 25 characters in length and may include special instruction
codes.Special instruction codes available are:
You may assign a Flex button of your iPECS IP or LDP Phone for One-Touch access to a specific System
Speed Dial bin.
Operation
iPECS IP & LDP Phones
To assign a Flex button as a {SYSTEM SPEED DIAL} button
[TRANS/PGM] + {FLEX} + [SPEED] + System Speed Dial bin number + [HOLD/SAVE]
To dial using a System Speed Dial using a [SPEED] button
1) Lift handset or press the [SPEAKER] button.
2) Press the [SPEED] button.
3) Dial the desired bin number(eMG80/100:2000-4999 / eMG800: 2000-9999 / UCP: 20000-31999).
To dial a System Speed Dial number using an LIP-8000/LIP-9000/1000i series phone with soft buttons
1) Press the [SPEED] soft button.
2) Dial the desired bin number (eMG80/100:2000-4999 / eMG800: 2000-9999 / UCP: 20000-31999).
SLT(Single Line Telephone)
To dial using a System Speed Dial
1) Lift handset.
2) Dial “*558”, the SLT(Single Line Telephone) Speed Dial access code.
3) Dial the desired bin number(eMG80/100:2000-4999 / eMG800: 2000-9999 / UCP: 20000-31999).
Attendant
To program a System Speed Dial number
1) Press the [TRANS/PGM] button.
2) Press the [SPEED] button.
To Next Page
Loading...
