21
Getting Started
Turning Your Phone On and Off
1. Open the flip.
2. Hold down the key until the phone switches on.
3. If the phone asks for a PIN, enter the PIN and press
the left soft key [OK]. For further details, see page 67.
The phone searches for your network and after finding
it, the idle screen, illustrated below, appears on the
display. Now, you can make or receive a call.
n Note
The display language is preset to English at the
factory. To change the language, use the
Languages menu option (Menu 9.2.4). For further
details, see page 64.
4. When you wish to switch the phone off, hold down
the key until the power-off image displays.
Access Codes
You can use the access codes described in this
section to avoid unauthorized use of your phone. The
access codes can be changed by using the Change
Codes feature (Menu 9.7.3).
Security code (4 to 8 digits)
The security code protects the unauthorized use of
your phone. The default security code is set to ‘0000’
and the security code is required to delete all phone
entries and to activate the Restore Factory Settings
menu. The security code default setting can be
modified from the Security Settings menu.
To Next Page
Loading...
Need help?
General
