LG 22LX570M User Manual (English)

Questions and Answers:

C
cunninghamkatelynAug 15, 2025
Why is my LG TV remote not working?
- R
  Richard McmillanAug 15, 2025
  If your LG TV remote isn't working, ensure it's in TV Mode by using the MODE key, if applicable. Point the remote directly at the IR receiver on the TV. If the remote is too far away, move it closer, darken the room, and remove any obstructions blocking the path. Also, replace the batteries if they are weak, and ensure they are inserted with the correct polarity (+ and -). Finally, dim the room light if there's too much light interfering with the remote's signal. If none of these actions work, the remote IR codes may not match the settings in the TV. Make sure the Installer Remote is compatible and contact your LG representative if necessary. Check the settings both in the TV and on the remote.
J
James HoffmanAug 18, 2025
Why does my LG TV have normal picture but no sound?
- C
  Cindy TorresAug 18, 2025
  If your LG TV displays a normal picture but has poor or no sound, the issue could be due to a broadcast problem. Try tuning to a different channel to see if the sound returns. Alternatively, the audio might be muted. Press the MUTE button or use the Volume Up key to increase the sound level. Another possibility is that the pillow or TV speaker is not configured properly. Check that Installer Menu items 020 FEATURE LEVEL and 027 HOSPITAL MODE are set as required. If applicable, select TV Speaker in the Audio Menu.
D
David FordAug 21, 2025
What to do if no channels are present after Express Script on LG 22LX570M TV?
- L
  Linda StevensAug 22, 2025
  If no channels are present on your LG TV after running the Express Script, it's likely that Auto Tuning was not run. Refer to the Express Script procedure to run Auto Tuning, which is necessary to populate the channel lineup. To reactivate the Express Script, restore the TV to a factory default condition.
K
Karen SmithAug 25, 2025
What to do if my LG 22LX570M has no picture?
- R
  richmichaelAug 25, 2025
  If your LG TV shows no picture, first ensure that the TV is turned ON. If it is, check that the antenna or cable is correctly connected to the TV. Verify all connections to the TV are secure. If you're using an MPI device, ensure the MPI cable is connected. The issue could also be due to an encrypted program, so try switching to another channel. Finally, check and adjust the Installer Menu settings to ensure the correct tuning band is selected.
J
johnbrewerAug 27, 2025
What causes communication error on my LG TV?
- R
  rosebassAug 28, 2025
  If you encounter a Communication Error (Communications Timeout) on your LG TV, start by checking and connecting all communication cables. Ensure the TV power cord is connected and that the TV is turned ON, as determined by the default setting of Installer Menu item 118 POWER SAVINGS. If you're using the FTG Device Configuration Application, verify that you've selected the correct COM port for the cable being used.
A
Ann JacksonAug 30, 2025
How to fix 'Inactive TV' message on LG 22LX570M?
- A
  Aaron BlackAug 30, 2025
  If your LG TV displays the message “Inactive TV” and then turns OFF, it's likely because the TV is set up to show this message when all channels are deleted from Channel Bank 4. To resolve this, simply select another channel bank (1, 2, or 3) to return the TV to normal operation.
K
Kimberly TaylorSep 2, 2025
How to fix LG 22LX570M when I cannot enter channel number directly?
- T
  tpalmerSep 3, 2025
  If you can't directly enter a channel number on your LG TV, it might be because the TV is in Pass-through Mode and Installer Menu item 028 CH. OVERIDE is set to 0, which disables direct keypad entry. To enable it, set 028 CH. OVERIDE to 1. Alternatively, if the TV is in FTG Mode, the channel you're trying to enter might not be included in the FTG Channel Map. If needed, make changes to the FTG Channel Map using the FTG File Manager or the FTG Device Configuration Application.
A
Alisha NguyenSep 5, 2025
Why channel found during auto tuning does not tune in with channel up/down on LG 22LX570M?
- M
  Michael AverySep 5, 2025
  If a channel found during Auto Tuning on your LG TV doesn't tune in with the Channel Up/Down buttons, the channel was likely deleted in the currently selected channel bank. Premium channels may only be available on another channel bank. To resolve this, modify the channel bank allocation(s) for the channel using the FTG Channel Map Editor in the FTG File Manager.

LG 22LX570M Specifications

General

Panel life	- h
Pixel pitch	- mm
Response time	9 ms
Display diagonal	21.6 \
Display brightness	- cd/m²
Display resolution	1366 x 768 pixels
Display technology	LED
Contrast ratio (dynamic)	1000000:1
Contrast ratio (typical)	1000:1
Display number of colors	-
USB version	2.0
USB 2.0 ports quantity	1
Product color	Silver
Product design	Digital signage flat panel
Panel mounting interface	75 x 75 mm
RMS rated power	5 W
Power consumption (standby)	0.5 W
Power consumption (typical)	20 W
Sustainability certificates	RoHS, ENERGY STAR
Certification	UL, FCC, RoHS, cUL, NOM, Energy Star 7.0
Picture mode	Vivid, Standard, Eco, Cinema, Sport, Game