22
ENG
ENGLISH
SPECIFICATIONS
SPECIFICATIONS
22MB35D
Display Screen Type Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Pixel Pitch 0.248 mm x 0.248 mm (Pixel Pitch)
Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic)
Vertical Frequency 56Hz to 75Hz (D-SUB,DVI-D)
Input Form Separate Sync. Digital
Video Input Signal Input 15 pin D-SUB Connector /DVI-D Connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Resolution Max D-SUB(Analog) : 1920 x 1080 @ 60 Hz
DVI (Digital) : 1920 x 1080 @ 60 Hz
Recommend VESA 1920 x 1080 @ 60 Hz
Plug & Play DDC 2B(Analog,Digital)
Power
Consumption
On Mode : 20.3 W Typ.(Outgoing condition)*
Sleep Mode ≤ 0.3 W **
Off Mode ≤ 0.3 W
Power Input AC 100-240V ~ 50/60Hz 1.0 A
Dimensions
(Width x Height x
Depth)
With Stand 50.9 cm x 39.8 cm x 21.0 cm
Without Stand 50.9 cm x 30.4 cm x 6.2 cm
Weight 3.1 kg
Tilt Range -5° to 20°
Environmental
conditions
Operating Temperature
Operating Humidity
10°C to 35 °C
10 % to 80 %
Storage Temperature
Storage Humidity
-20°C to 60 °C
5 % to 90 % non-Condensing
Stand Base Attached ( ), Detached (O)
Power cord Wall-outlet type
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
The power consumption level can be different by operating condition and monitor setting.
*The On mode power consumption is measured with LGE test standard(Full White pattern,Maximum
resolution).
** The monitor goes to the Sleep Mode in a couple of minutes(Max 5 minutes).
To Next Page
Loading...
