43
Operation
Screen Menu Options
Screen Menu Options
Auto Adjustment (DVI PC (RGB), Analogue PC mode only)
Press the MENU button and then use
DD
/
EE
button to select the
SCREEN menu.
Press the
GG
button and then use
DD
/
EE
button to select Auto config..
Press the
GG
button to run Auto configure.
• When
Auto config. has finished, OK will be shown on screen.
• If the position of the image is still not correct, try Auto adjustment
again.
If the image needs to be adjusted more after using Auto config., you
can make further adjustments with the
Manual config. option.
1
2
3
4
- If the image still isn’t clear after
auto adjustment and especially if
characters are still jittery, adjust
the picture Phase manually.
- To correct the screen size, adjust
Clock.
- This function is available in DVI
PC (RGB) and Component
sources. (In some input mode,
the
Manual config. options
(
Phase, Clock, H-Position, or
V-Position) may not work.)
Manual Configure
Press the MENU button and then use
DD
/
EE
button to select the
SCREEN menu.
Press the
GG
button and then use
DD
/
EE
button to select Manual config..
Press the
GG
button and then use
DD
/
EE
button to select Phase, Clock,
H-Position, or V-Position.
• Phase
:
Remove any horizontal noise and clear up or sharpen the char-
acter images.
• Clock
:
Minimizes any vertical bars or stripes appearing on the screen
background.
• H-Position / V-Position: Adjusts picture left/right and up/down.
Press the
FF
/
GG
button to make appropriate adjustments.
Press the EXIT button to return to normal TV viewing.
1
2
3
4
5
Prev.
Menu
Auto config.
G
Manual config.
XGA Mode
ARC
Zoom +/-
Position
Cinema
NR
Reset
SCREEN
Auto config.
Manual config.
XGA Mode
ARC
Zoom +/-
Position
Cinema
NR
Reset
SCREEN
To set
Prev.
Menu
Auto config.
Manual config.
G
XGA Mode
ARC
Zoom +/-
Position
Cinema
NR
Reset
SCREEN
Phase 10
Clock 0
H-Position 0
V-Position 0
- Automatically adjusts picture
position and minimizes image
shaking.
- After adjustment, if the image is
still not correct, your TV is func-
tioning properly but needs further
adjustment.
- Automatically adjusts the screen
position, clock, and phase. (The
displayed image will disappear for
a few seconds while Auto-configu-
ration is in progress.)
Auto config.
Manual config.
XGA Mode
ARC
Zoom +/-
Position
Cinema
NR
Reset
SCREEN
To Next Page
Loading...
Need help?
General
