10
ENG
ENGLISH
y
To avoid injury to the fingers and foot when
Assembling the Stand Body and Base, you
should hold the Base for better stability.
y
Illustrations in this document represent typical
procedures, so they may look different from
the actual product.
y
Do not carry the monitor upside down by just
holding the stand base. This may cause the
monitor to fall off the stand and could result in
personal injury.
y
When lifting or moving the monitor, do not
touch the monitor screen. The force applied
to the monitor screen may cause damage to
it.
y
Do not apply foreign substances (oils,
lubricants, etc.) to the screw parts when
assembling the product. (Doing so may
damage the product.)
y
Applying excessive force when tightening
screws may cause damage to the monitor.
Damage caused in this way will not be
covered by the product warranty.
CAUTION
y
You can disassemble the stand in the reverse
order of the assembly.
NOTE
WARNING
27MK600M
27MK60TM
Stand Base
Stand Body