ENGLISH
15
ASSEMBLING AND PREPARING
After attachment, if the cable holder is pulled
with excessive force, it may fall off.
CAUTION
Using the Kensington security
system
The Kensington security system connector is
located at the back of the TV. For more information
of installation and using, refer to the manual
supplied with the Kensington security system or
visit
http://www.kensington.com
.
Connect the Kensington security system cable
between the TV and a table.
The Kensington security system is optional.
You can obtain additional accessories from
most electronics stores.
NOTE
Tidying cables
1
Attach the cable holder to the edge of stand
body securely.
2
Gather and bind the cables with the supplied
cable holder.
To Next Page
