20
ENG
ENGLISH
WATCHING TV
WATCHING TV
Connecting to an antenna or
cable
Connect an antenna or cable to watch TV while
referring to the following. The illustrations may
differ from the actual items and a RF cable is
optional.
Connecting an antenna or basic
cable
Connect the TV to a wall antenna socket with a
RF cable (75
Ω
).
ANTENNA IN
NOTE
To improve the picture quality in a poor signal
area, please purchase a signal amplifier and
install properly.
If the antenna needs to be split for two TV’s,
install a 2-Way Signal Splitter.
If the antenna is not installed properly,
contact your dealer for assistance.
CAUTION
Make sure not to bend the copper wire of
the RF cable.
Copper wire
Complete all connections between devices,
and then connect the power cord to the
power outlet to prevent damage to your TV.
To Next Page
Loading...
