48
PICTURE CONTROL
PICTURE CONTROL
ENERGY SAVING
It reduces the plasma display’s power consumption.
The default factory setting complies with the Energy Star requirements and is adjusted to the comfort-
able level to be viewed at home.
You can increase the brightness of your screen by adjusting the Energy Saving level or by setting the
Picture Mode.
Aspect Ratio : 16:9
Energy Saving : Off
Picture Mode : Vivid
• Backlight
• Contrast 70
• Brightness 90
• Sharpness 50
• Colour 70
PICTURE
▼
Energy Saving : Medium
Off
Minimum
Medium
Maximum
Screen Off
Aspect Ratio : 16:9
Energy Saving : Off
Picture Mode : Vivid
• Backlight 100
• Contrast 100
• Brightness 50
• Sharpness 70
• Colour 70
PICTURE
▼
Energy Saving : Off
Medium
• When selecting Screen Off, the screen will be turned off after 3 seconds. In this case, if you want turn the
screen on, press any key on the set or the remote control or play the USB.
• If you adjust “Energy Saving-Minimum, Medium, Maximum”, Backl ight feature will not work.
• You can also adjust Energy Saving button.
1
Select PICTURE.
2
Select Energy Saving.
3
Select Off, Minimum, Medium, Maximum or Screen Off.
4
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
OKMove
OKMove
To Next Page
Loading...
